M15 is a bi-amp vented enclosure, mainly designed as a stage monitor speaker for tour performance, as well as various kinds of fixed installations.
The enclosure consists of a 15″ LF driver and a 75mm composite aluminum diaphragm HF compression driver. The voice coil of LF driver is 75mm, and the speakerframe is made of aluminum. The coverage of the HF horn is 50-100°X50°. The rotatable horn allows the near-ceiling mounting and aiming easy in the venues with restricted height. M15 provides 4 pcs flying tracks used for fixed installations or hanging and angle modulation in touring performance. The enclosure is configured with a 35mm poles and speaker stands at the bottom.
The cabinet is made of 15mm multi-plywood, and finished with black durable water paint. Two handle cups are mounted on the top and bottom of the enclosure for easy carrying and transporting. The rear panel plate carries two parallel SPEAKON NL4MP connectors for loop in and loop out connections. The enclosure is well protected by black mesh grill and acoustical sponge.
TECHNICAL SPEACIFICATION
FREQUENCY RESPONSE 60Hz~16KHz (±3 dB) 50Hz~18KH z(±10dB)
NOMINAL COVERAGE(-6dB) 50°~100 °(H) 50°(V)Constant directivity
SENSITIVIY(@1w/1m) 99 dB SPL
POWER RATING(AES) 450W
NOMINAL IMPEDANCE 8 Ohm
MAXIMUM SPL 125 dB (continous) 131 dB (peak)
DRIVERS LF 1x 15" (75mm voice coil) neodymium woofer
HF 1x 3" neodymium compression neodymium drivers
PHYSICA DATA
DIMENSIONS(Hx Wx D) 675x 446x 379mm
WEIGHTS 20kg
CONNECTORS 2x NL4MP Neutrik Speakon connectors
SPEAKER CABLES 1+1-
MATERIALS 18mm,24mm oaken multi-plywood
FINISH Black water paint
GRILLE Black epoxy mesh grille with acoustically reticulated foam